Dell Inspiron 14-5457 (P49G003) LCD Display Assembly Removal and Installation
Dell Inspiron 14-5457 (P49G003) LCD Display Assembly Removal and Installation
In this Dell laptop tutorial we are going to show you how to install and replace the LCD Display Assembly on your Inspiron 14-5457 (P49G003) laptop. These installation instructions have be made into 10 easy to follow printable steps. We have also create a video tutorial that shows you how to install your Inspiron 14-5457 (P49G003) LCD Display Assembly.
Before you begin
Please take the time read the following safety guidelines when working on static sensitive electrical components.
Dell repair manual service precautions
Tools needed for this laptop repair
1 x small phillips head screwdriver
1 x small plastic scribe
Step 1
Remove the 2 - M2.5 x 5mm screws.
Carefully pry up & remove the Access Door.
Remove the 2 - M2.5 x 5mm screws.Carefully pry up & remove the Access Door.Remove the 2 - M2.5 x 5mm screws.
Remove the 2 - M2.5 x 5mm screws.
Step 2
Remove the 2 - M2.5 x 5mm screws.
Use the pull tab to remove the Battery.
Remove the 2 - M2.5 x 5mm screws.Use the pull tab to remove the Battery.Remove the 2 - M2.5 x 5mm screws.
Remove the 3 - M2.5 x 5mm hard drive screws.
Step 3
Remove the 3 - M2.5 x 5mm hard drive screws.
Lift the Hard Drive out and move it to the right.
Unplug the hard drive connector.
Remove the 3 - M2.5 x 5mm hard drive screws.Lift the Hard Drive out and move it to the right.Unplug the hard drive connector.
Unplug the USB / SD cable.
Step 4
Unplug the USB / SD cable.
Unplug & loosen the LCD cable.
Unplug the USB / SD cable.Unplug & loosen the LCD cable.
Remove the 2 - M2.5 x 5mm screws.
Step 5
Remove the 2 - M2.5 x 5mm screws.
Unplug the fan cable.
Remove the Cooling Fan.
Remove the 2 - M2.5 x 5mm screws.Unplug the fan cable.Remove the Cooling Fan.
Remove the 2 - M2.5 x 8mm bottom hinge screws.
Step 6
Remove the 2 - M2.5 x 8mm bottom hinge screws.
Remove the 2 - M2 x 2mm Wafer screws under the battery.
Remove the 5 - M2.5 x 5mm bottom base screws.
Remove the 2 - M2.5 x 8mm bottom hinge screws.Remove the 2 - M2 x 2mm Wafer screws under the battery.Remove the 5 - M2.5 x 5mm bottom base screws.
Turn the laptop over & open it up.
Step 7
Turn the laptop over & open it up.
Using a flat head screwdriver, press the keyboard latches in and loosen the keyboard.
Unplug the cables.
Step 8
Unplug the cables.
Remove the Keyboard.
Unplug the cables.Remove the Keyboard.
Remove the 6 - M2.5 x 5mm screws under the keyboard.
Step 9
Remove the 6 - M2.5 x 5mm screws under the keyboard.
Turn the laptop over.
Carefully unsnap & remove the Bottom Base Chassis.
Remove the 6 - M2.5 x 5mm screws under the keyboard.Turn the laptop over.
Open the screen.
Step 10
Open the screen.
Remove the 2 - M2.5 x 8mm left hinge screws.
Remove the 2 - M2.5 x 8mm right hinge screws.
Remove the Display Assembly.
